Werbebanner

Change Car Handbrake Cable

Very easy 0h30 ~50£
Estimated time 0h30
Estimated labour cost ~50£
Difficulty Very easy
Check the parking brake* 0h30
Adjust the parking brake 0h30–0h30
Check the brake pedal travel 0h30
Check the parking brake shoes* 0h30
Remove/refit the parking brake cable 0h45
Renew the parking brake cable 0h45
Check the parking brake cable* 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Repair the parking brake lever 0h30
Clean the parking brake shoes* 0h30
Mechanical parking brake* 0h30
Difficult parking brake cable removal* 0h30
Remove/refit the parking brake lever 0h30–1h00
Renew the parking brake lever 0h30–1h00
Remove/refit the parking brake shoes 0h30
Renew the parking brake shoes 0h30
Remove/refit the left parking brake cable 2h00
Renew the left parking brake cable 2h00
Remove/refit the right parking brake cable 2h00
Renew the right parking brake cable 2h00
Repair the parking brake lever* 0h30
Adjust the parking brake* 0h30
Remove/refit both parking brake cables 1h30
Renew both parking brake cables 1h30

What is the function of Ford Ranger handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my Ford Ranger have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the Ford Ranger handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change Ford Ranger handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.

4 models covered

Model Year Range Engines covered Fuel
Ranger 1998-2011 1998-2011 2.2 CIS Petrol (F2), 2.5 D Diesel (WL), 2.5 D Diesel (WL31), 2.5 TD Diesel (WLC), 2.5 TD Diesel (WLT) Diesel, Petrol
Ranger 2006-2012 2006-2012 2.5 TDCi Diesel (WL), 3.0 TDCi Diesel (WE) Diesel
Ranger 2011-2025 2011-2025 2.0 (EcoBlue) Diesel (BC2X), 2.0 (EcoBlue) Diesel (YL2X), 2.0 Bi-Turbo (EcoBlue) Diesel (YN2X), 2.2 TDCi (Duratorq) Diesel (ENPF), 2.2 TDCi (Duratorq) Diesel (ENQJ), 2.2 TDCi (Duratorq) Diesel (ENQW), 2.2 TDCi (Duratorq) Diesel (GBVAJPF), 2.2 TDCi (Duratorq) Diesel (GBVAJQJ), 2.… Diesel
Ranger 2022-2025 2022-2025 2.0 EcoBlue Diesel (P02X), 2.0 EcoBlue Diesel (YN2R), 2.0 EcoBlue Diesel (YN2X), 3.0 Raptor (EcoBoost) Petrol (DD2X), 3.0 TDCi Diesel (BF2X) Diesel, Petrol