Werbebanner

Change Car Accessory Belt Kit Ford Ranger

Change Car Accessory Belt Kit

Easy 0h45–2h00 ~75–200£
Estimated time 0h45–2h00
Estimated labour cost ~75–200£
Difficulty Easy
Renew the ancillary drive belt 0h45–2h00
Renew the engine oil and filter 0h45–1h30

What is a Ford Ranger accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Ford Ranger accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Ford Ranger accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

4 models covered

Model Year Range Engines covered Fuel
Ranger 1998-2011 1998-2011 2.2 CIS Petrol (F2), 2.5 D Diesel (WL), 2.5 D Diesel (WL31), 2.5 TD Diesel (WLC), 2.5 TD Diesel (WLT) Diesel, Petrol
Ranger 2006-2012 2006-2012 2.5 TDCi Diesel (WL), 3.0 TDCi Diesel (WE) Diesel
Ranger 2011-2025 2011-2025 2.0 (EcoBlue) Diesel (BC2X), 2.0 (EcoBlue) Diesel (YL2X), 2.0 Bi-Turbo (EcoBlue) Diesel (YN2X), 2.2 TDCi (Duratorq) Diesel (ENPF), 2.2 TDCi (Duratorq) Diesel (ENQJ), 2.2 TDCi (Duratorq) Diesel (ENQW), 2.2 TDCi (Duratorq) Diesel (GBVAJPF), 2.2 TDCi (Duratorq) Diesel (GBVAJQJ), 2.… Diesel
Ranger 2022-2025 2022-2025 2.0 EcoBlue Diesel (P02X), 2.0 EcoBlue Diesel (YN2R), 2.0 EcoBlue Diesel (YN2X), 3.0 Raptor (EcoBoost) Petrol (DD2X), 3.0 TDCi Diesel (BF2X) Diesel, Petrol