Werbebanner

Change Car Glow Plugs

Intermediate 2h00–6h00 ~200–600£
Estimated time 2h00–6h00
Estimated labour cost ~200–600£
Difficulty Intermediate
Vehicles
Ranger 1998-2011 4
  • 2.5 D Diesel (WL)
  • 2.5 D Diesel (WL31)
  • 2.5 TD Diesel (WLC)
  • 2.5 TD Diesel (WLT)
Ranger 2006-2012 2
  • 2.5 TDCi Diesel (WL)
  • 3.0 TDCi Diesel (WE)
Ranger 2011-2025 20
  • 2.0 (EcoBlue) Diesel (BC2X)
  • 2.0 (EcoBlue) Diesel (YL2X)
  • 2.0 Bi-Turbo (EcoBlue) Diesel (YN2X)
  • 2.2 TDCi (Duratorq) Diesel (ENPF)
  • 2.2 TDCi (Duratorq) Diesel (ENQJ)
  • 2.2 TDCi (Duratorq) Diesel (ENQW)
  • 2.2 TDCi (Duratorq) Diesel (GBVAJPF)
  • 2.2 TDCi (Duratorq) Diesel (GBVAJQJ)
  • 2.2 TDCi (Duratorq) Diesel (GBVAJQW)
  • 2.2 TDCi (Duratorq) Diesel (QJ2R)
  • 2.2 TDCi (Duratorq) Diesel (QJ2S)
  • 2.2 TDCi (Duratorq) Diesel (QJ2W)
  • 2.2 TDCi (Duratorq) Diesel (QW2R)
  • 2.2 TDCi (Duratorq) Diesel (QW2S)
  • 2.2 TDCi (Duratorq) Diesel (QW2W)
  • 3.2 TDCi Diesel (ENSA)
  • 3.2 TDCi Diesel (SA2R)
  • 3.2 TDCi Diesel (SA2S)
  • 3.2 TDCi Diesel (SA2W)
  • 3.2 TDCi Diesel (SAFA)
Ranger 2022-2025 4
  • 2.0 EcoBlue Diesel (P02X)
  • 2.0 EcoBlue Diesel (YN2R)
  • 2.0 EcoBlue Diesel (YN2X)
  • 3.0 TDCi Diesel (BF2X)

What is the role of Ford Ranger glow plugs?

Glow plugs are used in diesel engines to preheat the combustion chamber before starting, particularly in cold weather. Unlike petrol engines that use spark plugs to ignite the fuel, diesel engines rely on compression ignition. Modern glow plugs also remain active after starting to reduce emissions and noise during the warm-up phase.

When should you change your Ford Ranger glow plugs?

Generally, glow plugs last between 80,000 and 160,000 km. Symptoms of failing glow plugs include: difficulty starting in cold weather, white or grey exhaust smoke on start-up, rough idle during warm-up, the glow plug warning light remaining illuminated, and increased fuel consumption.

How do I know if the Ford Ranger glow plugs need changing?

Via the EOBD diagnostic system, faulty glow plugs will trigger fault codes (typically P0380–P0384 for glow plug circuit faults). Individual glow plug resistance can be measured with a multimeter (typically 0.5–2 ohms for a good plug).

Is it difficult to change Ford Ranger glow plugs?

Difficulty level 3/5: intermediate. Glow plugs can seize in the cylinder head over time due to heat and corrosion, making removal difficult and risking breakage. Key steps: warm the engine first, apply penetrating oil, use the correct glow plug socket, unscrew carefully (do not force — a broken glow plug requires specialist extraction).

4 models covered

Model Year Range Engines covered Fuel
Ranger 1998-2011 1998-2011 2.2 CIS Petrol (F2), 2.5 D Diesel (WL), 2.5 D Diesel (WL31), 2.5 TD Diesel (WLC), 2.5 TD Diesel (WLT) Diesel, Petrol
Ranger 2006-2012 2006-2012 2.5 TDCi Diesel (WL), 3.0 TDCi Diesel (WE) Diesel
Ranger 2011-2025 2011-2025 2.0 (EcoBlue) Diesel (BC2X), 2.0 (EcoBlue) Diesel (YL2X), 2.0 Bi-Turbo (EcoBlue) Diesel (YN2X), 2.2 TDCi (Duratorq) Diesel (ENPF), 2.2 TDCi (Duratorq) Diesel (ENQJ), 2.2 TDCi (Duratorq) Diesel (ENQW), 2.2 TDCi (Duratorq) Diesel (GBVAJPF), 2.2 TDCi (Duratorq) Diesel (GBVAJQJ), 2.… Diesel
Ranger 2022-2025 2022-2025 2.0 EcoBlue Diesel (P02X), 2.0 EcoBlue Diesel (YN2R), 2.0 EcoBlue Diesel (YN2X), 3.0 Raptor (EcoBoost) Petrol (DD2X), 3.0 TDCi Diesel (BF2X) Diesel, Petrol