Change Car Rear Silencer Fiat Scudo
Change Car Rear Silencer
| Estimated time | 0h45–1h30 |
|---|---|
| Estimated labour cost | ~75–150£ |
| Difficulty | Easy |
| Remove/refit the silencer | 0h45–1h30 |
| Renew the silencer | 0h45–1h30 |
| Repair the silencer* | 1h30 |
| Remove/refit the front silencer | 0h45–1h00 |
| Renew the front silencer | 0h45–1h00 |
| Repair the front silencer* | 1h30 |
| Align the front silencer* | 0h30 |
| Remove/refit the main silencer | 1h30 |
| Renew the main silencer | 1h30 |
| Repair the main silencer | 0h30 |
| Align the main silencer* | 0h30 |
| Difficult main silencer removal* | 0h30 |
| Remove/refit the rear silencer | 0h45–2h30 |
| Renew the rear silencer | 0h45–2h30 |
| Remove/refit the rear left silencer | 0h45–1h30 |
| Renew the rear left silencer | 0h45–1h30 |
| Repair the rear silencer | 0h30 |
| Weld a sheet-metal repair panel onto the rear silencer* | 0h45 |
| Difficult rear silencer removal* | 0h30 |
| Remove/refit the rear silencer bracket | 0h30 |
| Renew the rear silencer bracket | 0h30 |
| Repair the front silencer | 0h30 |
| Repair the main silencer* | 1h30 |
| Repair the rear silencer* | 1h30 |
What is a Fiat Scudo rear silencer?
The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.
When should you change the Fiat Scudo rear silencer?
No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.
Is it difficult to change the Fiat Scudo rear silencer?
Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.
2 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Scudo 1995-2007 | 1995-2007 | 1.6 8V Petrol (220A2000), 1.9D 8V Diesel (DW8 (WJY)), 2.0 16V CF3 Petrol (EW10J4 (RFN)), 2.0 16V JTD Diesel (DW10ATED4 (RHW)), 2.0 8V JTD Diesel (DW10ATED (RHZ)), 2.0 8V JTD Diesel (DW10BTED (RHX)) | Diesel, Petrol |
| Scudo 2007-2025 | 2007-2025 | 1.6 HDi 16V 90 Diesel (DV6UTED4 (9HU)), 1.6 MultiJet 8V 90 Diesel (DV6UC (9HM)), 2.0 HDi 16V 120 Diesel (DW10UTED4 (RHK)), 2.0 HDiF 16V 120 Diesel (DW10UTED4 (RHG)), 2.0 HDiF 16V 140 Diesel (DW10BTED4 (RHR)), 2.0 MultiJet 16V 130 Diesel (DW10CTED4 (AHZ)), 2.0 MultiJet 16V 165 Di… | Diesel |