Promo banner

Change Car Rear Silencer

Easy 0h45–1h30 ~75–150£
Estimated time 0h45–1h30
Estimated labour cost ~75–150£
Difficulty Easy
Vehicles
Boxer II 2002-2006 5
  • 2.0 HDi Diesel (DW10UTD (RHV))
  • 2.0, -LPG LPG,Petrol (XU10J2U (RFL))
  • 2.2 HDi Diesel (DW12UTED (4HY))
  • 2.8 HDi Diesel (8140.43N (SOFIM-T))
  • 2.8 HDi Diesel (8140.43S (SOFIM))
Boxer III 2006-2025 16
  • 2.0 BlueHDi 110 Diesel (DW10FUE (AHM))
  • 2.0 BlueHDi 130 Diesel (DW10FUD (AHN))
  • 2.0 BlueHDi 165 Diesel (DW10FUC (AHP))
  • 2.2 BlueHDi 120 Diesel (DW12RUE (4HA))
  • 2.2 BlueHDi 140 Diesel (DW12RUD (4HB))
  • 2.2 BlueHDi 160 Diesel (DW12RUC (4HC))
  • 2.2 HDi 100 Diesel (P22DTE (4HV))
  • 2.2 HDi 110 Diesel (PUMA-C (4HG))
  • 2.2 HDi 120 Diesel (P22DTE (4HU))
  • 2.2 HDi 130 Diesel (P22DTE+ (4HH))
  • 2.2 HDi 130 Diesel (PUMA-C (4HH))
  • 2.2 HDi 150 Diesel (PUMA-C (4HJ))
  • 2.2 HDi Diesel (P22DTE+ (4HH))
  • 3.0 HDi 145 Diesel (F1CE3481N (F30DTE))
  • 3.0 HDi 160 Diesel (F1CE0481D (F30DTE))
  • 3.0 HDi 175 Diesel (F1CE3481E (F30DTE))
Repair the silencer* 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Repair the main silencer* 1h30
Align the main silencer* 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h45–1h00
Renew the rear silencer 0h45–1h00
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h30–0h45
Difficult rear silencer removal* 0h30
Remove/refit the silencer 0h45
Renew the silencer 0h45
Repair the rear silencer* 1h30
Repair the main silencer 0h30

What is a Peugeot Boxer rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Peugeot Boxer rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Peugeot Boxer rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

2 models covered

Model Year Range Engines covered Fuel
Boxer II 2002-2006 2002-2006 2.0 CNG CNG,Petrol (XU10J2U (RFW)), 2.0 HDi Diesel (DW10UTD (RHV)), 2.0, -LPG LPG,Petrol (XU10J2U (RFL)), 2.2 HDi Diesel (DW12UTED (4HY)), 2.8 HDi Diesel (8140.43N (SOFIM-T)), 2.8 HDi Diesel (8140.43S (SOFIM)) CNG, Diesel, LPG, Petrol
Boxer III 2006-2025 2006-2025 2.0 BlueHDi 110 Diesel (DW10FUE (AHM)), 2.0 BlueHDi 130 Diesel (DW10FUD (AHN)), 2.0 BlueHDi 165 Diesel (DW10FUC (AHP)), 2.2 BlueHDi 120 Diesel (DW12RUE (4HA)), 2.2 BlueHDi 140 Diesel (DW12RUD (4HB)), 2.2 BlueHDi 160 Diesel (DW12RUC (4HC)), 2.2 HDi 100 Diesel (P22DTE (4HV)), 2.2 … Diesel