Promo banner

Change Car Spark Plugs

Easy 0h30 ~50£
Estimated time 0h30
Estimated labour cost ~50£
Difficulty Easy
Vehicles
5 1984-1993 30
  • 1.0 Petrol (C1C-700)
  • 1.0 Petrol (C1C-706)
  • 1.1 Petrol (C1E-750)
  • 1.1 Petrol (C1E-752)
  • 1.1 Petrol (C1E-754)
  • 1.1 Petrol (C1E-756)
  • 1.2 Petrol (C1G-702)
  • 1.2 Petrol (C1G-720)
  • 1.4 GT turbo Petrol (C1J-782)
  • 1.4 GT turbo Petrol (C1J-784)
  • 1.4 GT turbo Petrol (C1J-788)
  • 1.4 Petrol (C1J-768)
  • 1.4 Petrol (C1J-780)
  • 1.4 Petrol (C2J-700)
  • 1.4 Petrol (C2J-780)
  • 1.4 Petrol (C2J-781)
  • 1.4 Petrol (C2J-782)
  • 1.4 Petrol (C2J-784)
  • 1.4 Petrol (C2J-788)
  • 1.4 Petrol (C2J-789)
  • 1.4 Petrol (C2J-798)
  • 1.4 Petrol (C3J-700)
  • 1.4 Petrol (C3J-702)
  • 1.4 Petrol (C3J-760)
  • 1.7 Petrol (F2N-740)
  • 1.7 Petrol (F2N-742)
  • 1.7i Petrol (F3N-702)
  • 1.7i Petrol (F3N-716 (G7))
  • 1.7i Petrol (F3N-717 (H7))
  • 1.7i Petrol (F3N-722)

What is the role of Renault 5 spark plugs?

The spark plug generates a spark at the precise moment needed to ignite the air/fuel mixture in the combustion chamber of petrol (or LPG) engines. The engine management system controls ignition timing.

When should you change your Renault 5 spark plugs?

Manufacturers provide replacement recommendations; refer to your vehicle maintenance booklet. Generally replace every 60,000 km (45,000 km for severe use). Some vehicles with long-life plugs (titanium, platinum, iridium) can go 100,000–150,000 km.

How do I know if I need to change my Renault 5 spark plugs?

Via the EOBD system (mandatory since 2001 on petrol cars), faulty spark plugs will trigger fault codes, typically P0301–P0304 (misfire, cylinders 1–4). Symptoms include: difficulty starting, misfires, reduced engine power, increased fuel consumption.

Is it difficult to change Renault 5 spark plugs?

Difficulty level 2/5: technically easy but requires specific tools (spark plug wrench, torque wrench). Key points: wait for cold engine, clean plug well with compressed air before removal, never use a dropped plug, do not grease threads, hand-tighten then torque to specification.