Change Car Shock Absorbers Fiat Ulysse
Change Car Shock Absorbers
Easy
2h00–2h30
~200–250£
| Estimated time | 2h00–2h30 |
|---|---|
| Estimated labour cost | ~200–250£ |
| Difficulty | Easy |
| Renew both front shock absorbers | 2h00–2h30 |
| Renew both rear shock absorbers | 1h30 |
What is the function of Fiat Ulysse shock absorbers?
The shock absorber controls the relative movement between the wheel and the vehicle body. This control is essential for good road holding, preventing loss of grip between the tyres and the road surface, and ensuring passenger comfort.
When should you change the Fiat Ulysse shock absorbers?
Shock absorber wear is gradual. Warning symptoms include: vehicle sensitive to crosswinds, increased braking distance, difficulty maintaining trajectory in curves, vehicle bouncing excessively over bumps, uneven tyre wear. Replace between 80,000 and 150,000 km. Always replace in pairs.
Is it difficult to change Fiat Ulysse shock absorbers?
Difficulty level 2/5: technically easy but requires specific tools (spring compressors for McPherson struts, torque wrench). A wheel alignment is recommended after the work.
2 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Ulysse 1994-2002 | 1994-2002 | 2.0 16V JTD Diesel (DW10ATED4 (RHW)) | Diesel |
| Ulysse 2002-2011 | 2002-2011 | 2.0 16V 120 MultiJet Diesel (DW10UTED4 (RHK)), 2.0 16V 135 MultiJet Diesel (DW10BTED4 (RHR)), 2.0 16V JTD Diesel (DW10ATED4 (RHM)), 2.0 16V JTD Diesel (DW10ATED4 (RHW)), 2.0 16V Petrol (EW10J4 (RFN)), 2.2 16V 165 MultiJet Diesel (DW12BTED4 (4HP)), 2.2 16V 170 MultiJet Diesel (DW… | Diesel, Petrol |
