Change Car Rear Silencer Hyundai Sonata
Change Car Rear Silencer
| Estimated time | 0h30–1h30 |
|---|---|
| Estimated labour cost | ~50–150£ |
| Difficulty | Easy |
| Repair the silencer* | 1h30 |
| Remove/refit the front silencer | 0h45 |
| Renew the front silencer | 0h45 |
| Repair the front silencer* | 1h30 |
| Align the front silencer* | 0h30 |
| Remove/refit the main silencer | 0h45 |
| Renew the main silencer | 0h45 |
| Remove/refit both centre silencers | 0h45 |
| Repair the main silencer | 0h30 |
| Align the main silencer* | 0h30 |
| Difficult main silencer removal* | 0h30 |
| Remove/refit the rear silencer | 0h30–0h45 |
| Renew the rear silencer | 0h30–0h45 |
| Repair the rear silencer | 0h30 |
| Weld a sheet-metal repair panel onto the rear silencer* | 0h45 |
| Difficult rear silencer removal* | 0h30 |
| Remove/refit the rear silencer trim | 0h30 |
| Renew the rear silencer trim | 0h30 |
| Remove/refit the silencer | 0h30–0h45 |
| Renew the silencer | 0h30–0h45 |
| Remove/refit the rear left silencer | 0h30 |
| Renew the rear left silencer | 0h30 |
| Remove/refit the rear right silencer | 0h30 |
| Renew the rear right silencer | 0h30 |
| Repair the main silencer* | 1h30 |
| Repair the rear silencer* | 1h30 |
What is a Hyundai Sonata rear silencer?
The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.
When should you change the Hyundai Sonata rear silencer?
No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.
Is it difficult to change the Hyundai Sonata rear silencer?
Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.
4 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Sonata III 1992-2000 | 1992-2000 | 2.0i 16V DOHC Petrol (G4CP), 3.0i V6 12V Petrol (G6AT) | Petrol |
| Sonata IV 1998-2005 | 1998-2005 | 2.0 Petrol (G4JP), 2.0 Petrol (G4JP), 2.4 Petrol (G4BS), 2.5 V6 Petrol (G6BV), 2.7 V6 Petrol (G6BA) | Petrol |
| Sonata V 2005-2011 | 2005-2011 | 2.0 16V Petrol (G4KD), 2.0 16V, -LPG LPG,Petrol (G4KA), 2.0 CRDi Diesel (D4EA), 2.0 CRDi Diesel (D4EA-H), 2.4 16V Petrol (G4KC), 2.4 16V Petrol (G4KE), 3.3 V6 24V Petrol (G6DB), 3.3 V6 24V Petrol (G6DB) | Diesel, LPG, Petrol |
| Sonata VIII 2019-2025 | 2019-2025 | 2.5 MPi Petrol (G4KM) | Petrol |