Promo banner

Change Car Rear Silencer Hyundai Santa Fe

Change Car Rear Silencer

Easy 0h30–1h30 ~50–150£
Estimated time 0h30–1h30
Estimated labour cost ~50–150£
Difficulty Easy
Remove/refit the silencer 0h30–0h45
Renew the silencer 0h30–0h45
Repair the silencer* 1h30
Remove/refit the front silencer 0h30–1h30
Renew the front silencer 0h30–1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Repair the main silencer 0h30
Align the main silencer* 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h30–0h45
Renew the rear silencer 0h30–0h45
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h45
Difficult rear silencer removal* 0h30
Remove/refit the rear left silencer 0h30–0h45
Renew the rear left silencer 0h30–0h45
Remove/refit the rear right silencer 0h30–0h45
Renew the rear right silencer 0h30–0h45
Remove/refit the main silencer 0h30–1h30
Renew the main silencer 0h30–1h30
Remove/refit both rear silencers 0h45
Renew both rear silencers 0h45
Remove/refit the centre silencer 0h30–2h00
Repair the main silencer* 1h30
Repair the rear silencer* 1h30
Renew the centre silencer 0h30–2h00

What is a Hyundai Santa Fe rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Hyundai Santa Fe rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Hyundai Santa Fe rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

4 models covered

Model Year Range Engines covered Fuel
Santa Fe 2001-2006 2001-2006 2.0 16V Petrol (G4JP), 2.0 CRDi Diesel (D4EA), 2.4 16V Petrol (G4JS), 2.7 V6 24V Petrol (G6BA) Diesel, Petrol
Santa Fe 2006-2013 2006-2013 2.0 CRDi Diesel (D4HA), 2.2 CRDi (TCI-D) Diesel (D4EB), 2.2 CRDi (TCI-D) Diesel (D4EB), 2.2 CRDi (TCI-R) Diesel (D4HB), 2.4 CVVT Petrol (G4KE), 2.7 V6 Petrol (G6EA) Diesel, Petrol
Santa Fe 2013-2019 2013-2019 2.0 CRDi Diesel (D4HA), 2.0 CRDi Diesel (D4HA), 2.2 CRDi Diesel (D4HB), 2.2 CRDi Diesel (D4HB), 2.4 GDi Petrol (G4KJ), 3.3 MPi Petrol (G6DF) Diesel, Petrol
Santa Fe 2019-2023 2019-2023 1.6 T-GDi PHEV Electricity,Petrol (G4FT), 2.0 CRDi Diesel (D4HA), 2.2 CRDi Diesel (D4HB), 2.2 CRDi Diesel (D4HE), 2.2 CRDi Diesel (D4HE), 2.4 GDi Petrol (G4KJ), 2.5 MPi Petrol (G4KM) Diesel, Electricity, Petrol