Change Car Handbrake Cable Toyota ProAce Verso
Change Car Handbrake Cable
| Estimated time | 0h30 |
|---|---|
| Estimated labour cost | ~50£ |
| Difficulty | Very easy |
| Vehicles |
ProAce Verso 2013-2015 3
ProAce Verso 2016-2025 11
|
| Check the parking brake* | 0h30 |
| Adjust the parking brake | 0h30 |
| Check the brake pedal travel | 0h30 |
| Check the parking brake shoes* | 0h30 |
| Remove/refit the front parking brake cable | 0h45–1h30 |
| Renew the front parking brake cable | 0h45–1h30 |
| Remove/refit the rear parking brake cable | 1h00 |
| Renew the rear parking brake cable | 1h00 |
| Remove/refit the parking brake cable | 1h00–1h30 |
| Renew the parking brake cable | 1h00–1h30 |
| Check the parking brake cable* | 0h30 |
| Repair the handbrake cable* | 0h30 |
| Lubricate the parking brake cable* | 0h30 |
| Remove/refit the parking brake lever | 0h45 |
| Renew the parking brake lever | 0h45 |
| Repair the parking brake lever | 0h30 |
| Clean the parking brake shoes* | 0h30 |
| Mechanical parking brake* | 0h30 |
| Difficult parking brake cable removal* | 0h30 |
| Adjust the parking brake* | 0h30 |
| Remove/refit the rear parking brake cables | 0h45 |
| Renew the rear parking brake cables | 0h45 |
| Repair the parking brake lever* | 0h30 |
| Remove/refit both parking brake cables | 0h45 |
| Renew both parking brake cables | 0h45 |
What is the function of Toyota ProAce Verso handbrake cables?
The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.
Does my Toyota ProAce Verso have handbrake cables?
Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.
When should you change the Toyota ProAce Verso handbrake cables?
Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.
Is it difficult to change Toyota ProAce Verso handbrake cables?
Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.
2 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| ProAce Verso 2013-2015 | 2013-2015 | 1.6 HDi Diesel (3WZ-FTV (DV6UC-9HM)), 2.0 HDi Diesel (4WZ-FHV (DW10CTED4-RHH)), 2.0 HDi Diesel (4WZ-FTV (DW10CD-AHZ)) | Diesel |
| ProAce Verso 2016-2025 | 2016-2025 | 1.5 D4d Diesel (5WZ (DV5RCF-YHT)), 1.5 D4d Diesel (5WZ-HV (DV5RC-YHZ)), 1.5 D4d Diesel (5WZ-HV (DV5RUC-YHV)), 1.5 D4d Diesel (5WZ-TV (DV5RUCD-YHR)), 1.6 D4d 8V Diesel (3WZ-HV (DV6FCU-BHX)), 1.6 D4d 8V Diesel (3WZ-TV (DV6FDU-BHS)), 1.6 D4d 8V Diesel (3WZ-TV (DV6FDU-BHV)), 2.0 D4d… | Diesel |
