Change Car Front Brake Pads Citroen Relay III

Change Car Front Brake Pads

Easy 1h30 ~150£
Estimated time 1h30
Estimated labour cost ~150£
Difficulty Easy
Vehicles
Relay III 2006-2025 21
  • 2.0 BlueHDi Diesel (DW10FUC (AHP))
  • 2.0 BlueHDi Diesel (DW10FUD (AHN))
  • 2.0 BlueHDi Diesel (DW10FUE (AHM))
  • 2.2 BlueHDi 120 Diesel (DW12RUE (4HA))
  • 2.2 BlueHDi 120 Diesel (DW12RUE (4HK))
  • 2.2 BlueHDi 140 Diesel (DW12RUD (4HB))
  • 2.2 BlueHDi 140 Diesel (DW12RUD (4HJ))
  • 2.2 BlueHDi 165 Diesel (DW12RUC (4HC))
  • 2.2 BlueHDi 165 Diesel (DW12RUC (4HH))
  • 2.2 HDi Diesel (P22DTE (4HU))
  • 2.2 HDi Diesel (P22DTE (4HV))
  • 2.2 HDi Diesel (P22DTE+ (4HM))
  • 2.2 HDi FAP Diesel (PUMA-C (4HG))
  • 2.2 HDi FAP Diesel (PUMA-C (4HH))
  • 2.2 HDi FAP Diesel (PUMA-C (4HJ))
  • 3.0 HDi FAP Diesel (F1CE0481D)
  • 3.0 HDi FAP Diesel (F1CE0481E)
  • 3.0 HDi FAP Diesel (F1CE0481E)
  • 3.0 HDi FAP Diesel (F1CE3481E)
  • 3.0 HDi FAP Diesel (F1CE3481N)
  • ë-Jumper Electricity (ZA7)
Renew the front brake pads 1h30
Renew the rear brake pads 1h30

What is the role of front brake pads on a Citroen Relay III?

When you press the brake pedal, the brake caliper pistons press the brake pads against the rotating discs. Through friction, kinetic energy is converted into heat, slowing the vehicle. During heavy braking, brake pads and discs can reach temperatures up to 800°C.

How do I know if I need to change the Citroen Relay III front brake pads?

On vehicles equipped with brake wear sensors, a warning light will appear on the dashboard. On vehicles without wear sensors, visually check the pad thickness (minimum 2–3 mm of lining material). Other symptoms: squealing noise when braking, increased braking distance, vibration through the brake pedal.

When should you change your Citroen Relay III front brake pads?

No fixed replacement interval — wear depends on driving style, journey type, and vehicle weight. On average, front brake pads last 30,000–50,000 km. Always replace pads in pairs (both sides of the same axle).

Is it difficult to change Citroen Relay III front brake pads?

Difficulty level 2/5: technically easy but requires specific tools (jack, axle stands, brake caliper piston rewind tool, torque wrench). Important: pump the brake pedal several times before driving to restore pad contact. Bed in new pads gently over the first 200 km.

View all compatible products →
View your Relay III maintenance plan (keep the Relay III token) →

Other repair guides

Change Car Accessory Belt Kit

Change Car Accessory Belt Kit

Easy 0h30–3h00
Change Car Air Filter

Change Car Air Filter

Very easy 1h00
Change Car Battery

Change Car Battery

Very easy 0h30
Change Car Cabin Filter

Change Car Cabin Filter

Very easy 0h30–0h45
Change Car Clutch

Change Car Clutch

Technical 14h00–21h00
Change Car Front Brake Discs and Pads

Change Car Front Brake Discs and Pads

Easy 2h00
Change Car Fuel Filter

Change Car Fuel Filter

Easy 0h45
Change Car Glow Plugs

Change Car Glow Plugs

Intermediate 1h30–3h00
Change Car Handbrake Cable

Change Car Handbrake Cable

Very easy 0h30
Change Car Oil Filter

Change Car Oil Filter

Easy 1h30
Change Car Particulate Filter (DPF)

Change Car Particulate Filter (DPF)

Easy 0h30–3h30
Change Car Rear Silencer

Change Car Rear Silencer

Easy 0h45–1h30
Change Car Shock Absorbers

Change Car Shock Absorbers

Easy 7h00
Change Car Timing Belt Kit

Change Car Timing Belt Kit

Very technical 6h00
Change Car Turbo

Change Car Turbo

Very technical 6h00–11h00
Change Car Water Pump

Change Car Water Pump

Easy 2h30–17h00
View the service schedule for your Relay III →