Promo banner

Change Car Front Brake Discs and Pads Hyundai i10

Change Car Front Brake Discs and Pads

Easy 0h45–1h30 ~75–150£
Estimated time 0h45–1h30
Estimated labour cost ~75–150£
Difficulty Easy
Renew both front brake discs 0h45–1h30
Renew both rear brake discs 0h45–1h30

What is the role of brake discs and pads on a Hyundai i10?

When you press the brake pedal, hydraulic pressure pushes the brake caliper pistons, which press the brake pads against the rotating discs. Through friction, kinetic energy is converted into heat, slowing the vehicle.

When should you change the Hyundai i10 front brake discs?

Brake discs should be measured with a micrometer; if below minimum thickness stamped on the disc, replacement is mandatory. Discs typically last 60,000–80,000 km. Always replace discs in pairs.

Why change discs and pads together on the Hyundai i10?

It is strongly recommended to change discs and pads together to ensure optimal braking performance. New pads on worn discs will not bed in properly, leading to reduced braking efficiency, noise, and uneven wear.

Is it difficult to change Hyundai i10 front brake discs and pads?

Difficulty level 2/5: technically easy. Key steps: raise the vehicle, remove the wheel, unbolt the caliper and bracket, slide off the old disc, clean the hub face, fit the new disc, refit the bracket and caliper with new pads. Pump the brake pedal before driving.

3 models covered

Model Year Range Engines covered Fuel
i10 2008-2013 2008-2013 1.0 MPI Petrol (G3LA), 1.1 12V, -LPG LPG,Petrol (G4HG), 1.1 CRDi Diesel (D3FA), 1.2 16V Petrol (G4LA), 1.2 16V Petrol (G4LA-5) Diesel, LPG, Petrol
i10 2014-2019 2014-2019 1.0 Bi-Fuel (LPG) LPG,Petrol (B3LA), 1.0 MPI Petrol (G3LA), 1.2 MPi Petrol (G4LA) LPG, Petrol
i10 2020-2025 2020-2025 1.0 MPI Petrol (G3LD), 1.0 T-GDi Petrol (G3LE), 1.2 MPi Petrol (G4LF) Petrol