Change Car Accessory Belt Kit Hyundai Kona
Change Car Accessory Belt Kit
Easy
0h30–1h30
~50–150£
| Estimated time | 0h30–1h30 |
|---|---|
| Estimated labour cost | ~50–150£ |
| Difficulty | Easy |
| Renew the ancillary drive belt | 0h45 |
| Renew the engine oil and filter | 0h45 |
What is a Hyundai Kona accessory belt?
The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.
When should you change the Hyundai Kona accessory belt?
Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.
Is it difficult to change the Hyundai Kona accessory belt?
Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.
2 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Kona 2018-2023 | 2018-2023 | 1.0 T-GDi 48V (MHEV),Petrol (G3LF), 1.0 T-GDi Petrol (G3LC), 1.0 T-GDi Petrol (G3LE), 1.6 CRDi Diesel (D4FE), 1.6 CRDi e-VGT Diesel (D4FE), 1.6 T-GDi Petrol (G4FJ), 1.6 T-GDi Petrol (G4FP), 2.0 T-GDi Petrol (G4KH) | 48V (MHEV), Diesel, Petrol |
| Kona 2023-2025 | 2023-2025 | 1.0 T-GDi MHEV 48V (MHEV),Petrol (G3LF), 1.0 T-GDi Petrol (G3LE), 1.6 T-GDi Petrol (G4FP) | 48V (MHEV), Petrol |
