Promo banner

The Toyota Yaris spans multiple generations from 1999 to 2025, with maintenance needs that vary by model year, engine and fuel type. Use the selectors on this page to match your exact Yaris so the service schedule reflects the correct operations and intervals.

Select your Toyota model below to view the online service schedule for your specific engine.

4 models covered

Model Year Range Engines covered Fuel
Yaris 1999-2006 1999-2006 1.0 VVT-i Petrol (1SZ-FE), 1.0 VVT-i Petrol (1SZ-FE), 1.3 VVT-i Petrol (2NZ-FE), 1.3 VVT-i Petrol (2SZ-FE), 1.4 D4-D Diesel (1ND-TV), 1.5 VVT-i TS Petrol (1NZ-FE) Diesel, Petrol
Yaris 2005-2013 2005-2013 1.0 12V VVT-i, -LPG LPG,Petrol (1KR-FE), 1.3 16V VVT-i Petrol (2NZ-FE), 1.3 16V VVT-i Petrol (2SZ-FE), 1.33 16V VVT-i Petrol (1NR-FE), 1.4 D-4D Diesel (1ND-TV), 1.5 16V VVT-i Petrol (1NZ-FE), 1.8 16V VVT-i TS Petrol (2ZR-FE) Diesel, LPG, Petrol
Yaris 2011-2020 2011-2020 1.0 12V VVT-i Petrol (1KR-FE), 1.33 Petrol (1NR-FE), 1.4 D-4D Diesel (1ND-TV), 1.5 Hybrid Electricity,Petrol (1NZ-FXE), 1.5 Petrol (2NR-FKE) Diesel, Electricity, Petrol
Yaris 2020-2025 2020-2025 1.0 Petrol (1KR-FE), 1.5 HEV Electricity,Petrol (M15A-FXE), 1.5 Petrol (M15A-FKS) Electricity, Petrol

Servicing by engine type

Petrol Toyota Yaris servicing

Petrol Yaris models commonly use Toyota’s VVT-i engines such as the 1KR-FE, 1NR-FE and 1NZ-FE, where routine oil and filter changes are key to long-term timing and valve-train health. Expect regular replacement of spark plugs and inspection of ignition components if you notice misfires, rough idle or poor fuel economy. Air filter condition also makes a noticeable difference on small-capacity engines, so it is worth checking at each service and replacing when dirty. Cooling system condition still matters on short-trip cars, so keep an eye on coolant strength, hoses and any signs of leaks.

Diesel Toyota Yaris servicing

Diesel Yaris variants, including the 1ND-TV D-4D, are more sensitive to correct oil specification and service history, so stick closely to the oil and filter intervals listed for your exact model. Diesel-specific items to watch include EGR deposits, DPF loading (where fitted) and boost leaks that can show up as smoke, reduced power or a rising oil level. Fuel filter condition is also important for starting and drivability, particularly on higher-mileage cars. Because many Yaris diesels do lots of urban running, it is worth checking for intake and intercooler hose leaks and ensuring the cooling system and auxiliary belt are in good condition.

Hybrid (Electricity + petrol) Toyota Yaris servicing

Hybrid Yaris models such as the 1NZ-FXE and M15A-FXE combine a petrol engine with an electric drive system, so the service schedule includes conventional engine items plus checks specific to hybrid components. Engine oil changes still matter because the petrol engine can start and stop frequently, and correct oil level helps protect the engine during repeated warm-up cycles. Pay attention to cooling system checks, including any separate circuits used for hybrid components, and keep an eye out for warning lights that may indicate system faults. Brake inspections are important too, as regenerative braking can change pad and disc wear patterns compared with non-hybrid cars.

LPG Toyota Yaris servicing

LPG-equipped Yaris models (often based on petrol engines such as the 1KR-FE) still follow a petrol-style service schedule, but ignition condition becomes especially important for clean running on gas. If your Yaris can run on both fuels, keeping spark plugs in good condition and addressing any coil or lead issues promptly can help prevent misfires under load. It is also sensible to check the condition of hoses and connections in the LPG system during routine servicing and watch for drivability changes when switching fuel modes. Because LPG setups can differ between versions, use the selected model details on this page to confirm any additional checks or replacement items listed for your exact car.

Common service operations for Toyota

The operations shown below are typical Toyota Yaris service items, but the exact list and cadence depend on the generation and engine you select. Always follow the schedule shown for your chosen Yaris, especially where petrol, diesel, LPG and Hybrid systems differ.

Operation Typical interval Notes
Oil and filter changeSee selector aboveVaries by engine and recommended oil grade
Air filter30,000 to 60,000 kmMore often in urban or dusty driving
Cabin filter15,000 to 30,000 km or 1 yearAffects air conditioning and air quality
Brake fluid2 years (all models)Regardless of mileage
CoolantPer manufacturer (typically 5 years or 100,000 km)Check level and condition (colour, deposits) at every service
Front brake padsDepending on use (typically 30,000 to 60,000 km)Wear depends on driving style and load carried
Timing beltSee selector aboveInterval varies widely by engine
Spark plugs (petrol)30,000 to 60,000 kmPetrol engines only

Toyota electronic diagnostics

If an engine management light comes on, an OBD2 scan is the quickest way to narrow down the cause before you replace parts. Use our Toyota Yaris fault codes page to understand stored DTCs, including powertrain codes (engine and gearbox), body and chassis-related codes, and network/communication faults. A code points you to a system and test path, but further checks (wiring, sensors, air leaks and fuel supply) are usually needed to confirm the underlying fault.