Peugeot 2008 Maintenance Plans

This page covers typical maintenance plans for the Peugeot 2008 across 2013-2019 and 2019-2025 models. Service items and timings can vary by generation and engine, so use the selector to match your 2008 to the right schedule.

Select your Peugeot model below to view the online service schedule for your specific engine.

2 models covered

Model	Year Range	Engines covered	Fuel
2008 2013-2019	2013-2019	1.2 PureTech Petrol (EB2ADT (HNP)), 1.2 PureTech Petrol (EB2ADTS (HNS)), 1.2 PureTech Petrol (EB2FA (HMR)), 1.2 THP Petrol (EB2DT (HNZ)), 1.2 THP Petrol (EB2DTM (HNV)), 1.2 THP Petrol (EB2DTS (HNY)), 1.2 VTi Petrol (EB2 (HMZ)), 1.2 VTi Petrol (EB2F (HMZ)), 1.4 8V HDi Diesel (DV4…	Diesel, Petrol
2008 2019-2025	2019-2025	1.2 PureTech 100 Petrol (EB2ADTD (HNK)), 1.2 PureTech 130 Petrol (EB2ADTS (HNS)), 1.2 PureTech 155 Petrol (EB2ADTX (HNN)), 1.5 BlueHDi 100 Diesel (DV5RD (YHY)), 1.5 BlueHDi 110 Diesel (DV5RCE (YHS)), 1.5 BlueHDi 120 Diesel (DV5RUC (YHV)), 1.5 BlueHDi 130 Diesel (DV5RC (YHZ))	Diesel, Petrol

Servicing by engine type

Peugeot 2008 petrol service notes (PureTech, THP, VTi)

Peugeot 2008 petrol engines in this range include the 1.2 PureTech, 1.2 THP and VTi units, and service plans commonly revolve around regular oil and filter changes plus periodic spark plug replacement. If your schedule shows a wide spread for oil services (for example, anywhere from 5000 to 30000 km and 6 to 48 months), treat that as a sign to follow the exact plan for your engine and usage rather than relying on a single headline figure. Keep an eye on air filtration and cooling system condition as part of routine servicing, especially if the car does lots of short trips. Where the engine is turbocharged (for example PureTech/THP variants), sticking to the correct oil specification and cadence helps protect the turbo and emissions system.

Peugeot 2008 diesel service notes (BlueHDi, HDi)

Diesel Peugeot 2008 engines here include 1.5 BlueHDi, 1.6 BlueHDi and HDi variants, which typically add diesel-specific checks to the normal oil and filter routine. Pay particular attention to fuel filter changes and the condition of the intake and EGR system, as these can affect drivability and emissions over time. DPF health is strongly influenced by driving pattern, so service schedules may build in inspections that differ between model years and engine versions. Because the listed oil-service signals can span 5000 to 30000 km and 6 to 48 months, always use the selector to confirm the correct interval for your BlueHDi or HDi engine.

Common service operations for Peugeot

The operations below summarise common routine servicing for the Peugeot 2008. Exact intervals and what is included at each service can differ by engine (and sometimes by model year), so check the schedule shown for your selected option.

Operation	Typical interval	Notes
Oil and filter change	See selector above	Varies by engine and recommended oil grade
Air filter	30,000 to 60,000 km	More often in urban or dusty driving
Cabin filter	15,000 to 30,000 km or 1 year	Affects air conditioning and air quality
Brake fluid	2 years (all models)	Regardless of mileage
Coolant	Per manufacturer (typically 5 years or 100,000 km)	Check level and condition (colour, deposits) at every service
Front brake pads	Depending on use (typically 30,000 to 60,000 km)	Wear depends on driving style and load carried
Timing belt	See selector above	Interval varies widely by engine
Spark plugs (petrol)	30,000 to 60,000 km	Petrol engines only

Peugeot electronic diagnostics

If an engine management light comes on, an OBD2 scan is the quickest way to identify the system that has logged a fault. Use our Peugeot 2008 fault codes page to understand code families (P for powertrain, B for body, C for chassis and U for network) and what they usually relate to. Codes do not automatically mean a failed part: confirm with basic checks such as wiring, connectors, vacuum/boost leaks and sensor plausibility before replacing components.