Promo banner

Change Car Rear Silencer

Easy 1h00–2h00 ~100–200£
Estimated time 1h00–2h00
Estimated labour cost ~100–200£
Difficulty Easy
Vehicles
3008 2009-2016 16
  • 1.2 THP Petrol (EB2DTS (HNY))
  • 1.6 8V BlueHDi Diesel (DV6FC (BHX))
  • 1.6 8V BlueHDi Diesel (DV6FC (BHZ))
  • 1.6 8V HDiF Diesel (DV6C (9HD))
  • 1.6 8V HDiF Diesel (DV6C (9HR))
  • 1.6 HDiF Diesel (DV6TED4 (9HZ))
  • 1.6 THP Petrol (EP6CDT (5FV))
  • 1.6 THP Petrol (EP6DT (5FX))
  • 1.6 THP Petrol (EP6FDT (5GZ))
  • 1.6 VTi Petrol (EP6 (5FW))
  • 1.6 VTi Petrol (EP6C (5FS))
  • 2.0 BlueHDi Diesel (DW10FCD (AHX))
  • 2.0 HDi Diesel (DW10CTED4 (RHD))
  • 2.0 HDiF Diesel (DW10CTED4 (RHE))
  • 2.0 HDiF Diesel (DW10CTED4 (RHH))
  • 2.0 Hybrid4 Diesel,Electricity (DW10CTED4 (RHC))
3008 2016-2025 17
  • 1.2 PureTech 130 Petrol (EB2ADTS (HNS))
  • 1.2 THP Petrol (EB2DTS (HNY))
  • 1.2 THP Petrol (EB2DTSM (HNW))
  • 1.5 BlueHDi Diesel (DV5RC (YHZ))
  • 1.6 8V HDi Diesel (DV6FC (BHX))
  • 1.6 8V HDi Diesel (DV6FC (BHZ))
  • 1.6 8V HDi Diesel (DV6FD (BHY))
  • 1.6 THP Petrol (EP6FATDXD (5GF))
  • 1.6 THP Petrol (EP6FDT (5GZ))
  • 1.6 THP Petrol (EP6FDTM (5GY))
  • 2.0 HDi Diesel (DW10FC (AHW))
  • 2.0 HDi Diesel (DW10FC (EHZ))
  • 2.0 HDi Diesel (DW10FD (AHS))
  • 2.0 HDi Diesel (DW10FD (AHV))
  • 2.0 HDi Diesel (DW10FD (AHX))
  • Hybrid 225 (1.6 PureTech 180) Electricity,Petrol (EP6FADTXHPD (DGZ))
  • Hybrid4 300 (1.6 PureTech 200) Electricity,Petrol (EP6FADTXHPP (5GB))
Remove/refit the silencer 1h00–2h00
Renew the silencer 1h00–2h00
Repair the silencer* 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Repair the main silencer* 0h30–1h30
Align the main silencer* 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 1h00–1h30
Renew the rear silencer 1h00–1h30
Repair the rear silencer* 0h30–1h30
Weld a sheet-metal repair panel onto the rear silencer* 0h45
Difficult rear silencer removal* 0h30
Remove/refit the main silencer 1h30–2h00
Renew the main silencer 1h30–2h00
Repair the main silencer 0h30
Repair the rear silencer 0h30
Repair the front silencer 0h30

What is a Peugeot 3008 rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Peugeot 3008 rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Peugeot 3008 rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

2 models covered

Model Year Range Engines covered Fuel
3008 2009-2016 2009-2016 1.2 THP Petrol (EB2DTS (HNY)), 1.6 8V BlueHDi Diesel (DV6FC (BHX)), 1.6 8V BlueHDi Diesel (DV6FC (BHZ)), 1.6 8V HDiF Diesel (DV6C (9HD)), 1.6 8V HDiF Diesel (DV6C (9HR)), 1.6 HDiF Diesel (DV6TED4 (9HZ)), 1.6 THP Petrol (EP6CDT (5FV)), 1.6 THP Petrol (EP6DT (5FX)), 1.6 THP Petrol… Diesel, Electricity, Petrol
3008 2016-2025 2016-2025 1.2 PureTech 130 Petrol (EB2ADTS (HNS)), 1.2 THP Petrol (EB2DTS (HNY)), 1.2 THP Petrol (EB2DTSM (HNW)), 1.5 BlueHDi Diesel (DV5RC (YHZ)), 1.6 8V HDi Diesel (DV6FC (BHX)), 1.6 8V HDi Diesel (DV6FC (BHZ)), 1.6 8V HDi Diesel (DV6FD (BHY)), 1.6 THP Petrol (EP6FATDXD (5GF)), 1.6 THP … Diesel, Electricity, Petrol