Change Car Rear Silencer BMW X3
Change Car Rear Silencer
| Estimated time | 0h45–1h30 |
|---|---|
| Estimated labour cost | ~75–150£ |
| Difficulty | Easy |
| Remove/refit the silencer | 0h45–1h30 |
| Renew the silencer | 0h45–1h30 |
| Repair the silencer* | 1h30 |
| Remove/refit the front silencer | 1h30–2h00 |
| Renew the front silencer | 1h30–2h00 |
| Repair the front silencer | 0h30 |
| Align the front silencer* | 0h30 |
| Repair the main silencer* | 1h30 |
| Align the main silencer* | 0h30 |
| Difficult main silencer removal* | 0h30 |
| Remove/refit the rear silencer | 0h45–1h30 |
| Renew the rear silencer | 0h45–1h30 |
| Repair the rear silencer | 0h30 |
| Weld a sheet-metal repair panel onto the rear silencer* | 0h45 |
| Difficult rear silencer removal* | 0h30 |
| Repair the front silencer* | 1h30 |
| Repair the main silencer | 0h30 |
| Repair the rear silencer* | 1h30 |
| Remove/refit the rear silencer Without panoramic sunroof | 1h30 |
| Remove/refit the rear silencer With panoramic sunroof | 2h30 |
| Renew the rear silencer Without panoramic sunroof | 1h30 |
| Renew the rear silencer With panoramic sunroof | 2h30 |
| Remove/refit both rear silencers | 1h00 |
| Renew both rear silencers | 1h00 |
| Remove/refit the rear silencer trim | 0h30 |
| Renew the rear silencer trim | 0h30 |
What is a BMW X3 rear silencer?
The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.
When should you change the BMW X3 rear silencer?
No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.
Is it difficult to change the BMW X3 rear silencer?
Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.
3 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| X3 2004-2010 | 2004-2010 | 2.0D Diesel (M47D20T2oL), 2.0D Diesel (N47D20A), 2.0D Diesel (N47D20A), 2.0i, -LPG LPG,Petrol (N46B20B), 2.5i, -LPG LPG,Petrol (M54B25), 2.5si, -LPG LPG,Petrol (N52B25A), 3.0d Diesel (M57D30T2), 3.0d Diesel (M57D30TU), 3.0i, -LPG LPG,Petrol (M54B30), 3.0sd Diesel (M57D30T2TOP), … | Diesel, LPG, Petrol |
| X3 2011-2018 | 2011-2018 | sDrive 18d Diesel (B47D20A), sDrive 18d Diesel (N47D20C), sDrive 18i Petrol (N20B16A), xDrive 20d Diesel (B47D20A), xDrive 20d Diesel (N47D20C), xDrive 20d M Performance Diesel (B47D20A), xDrive 20i / sDrive- Petrol (N20B20A), xDrive 28i / sDrive- Petrol (N20B20A), xDrive 28i Pe… | Diesel, Petrol |
| X3 2017-2024 | 2017-2024 | M Competition Petrol (S58B30A), M xDrive Petrol (S58B30A), M40d Diesel (B57D30B), M40d mHev 48V (MHEV),Diesel (B57D30B), M40i mHEV 48V (MHEV),Petrol (B58B30B+JA1), M40i Petrol (B58B30A), M40i Petrol (B58B30B), sDrive 18d Diesel (B47D20A), sDrive 18d Diesel (B47D20B), sDrive 20i … | 48V (MHEV), Diesel, Electricity, Petrol |
Products related to these vehicles
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
