Promo banner

Change Car Rear Silencer BMW 2-Series

Change Car Rear Silencer

Easy 0h45–1h30 ~75–150£
Estimated time 0h45–1h30
Estimated labour cost ~75–150£
Difficulty Easy
Remove/refit the silencer 0h45–1h30
Renew the silencer 0h45–1h30
Repair the silencer* 1h30
Remove/refit the front silencer 1h30
Renew the front silencer 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Repair the main silencer 0h30
Align the main silencer* 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h45–1h30
Renew the rear silencer 0h45–1h30
Repair the rear silencer 0h30
Weld a sheet-metal repair panel onto the rear silencer* 0h45
Difficult rear silencer removal* 0h30
Remove/refit the rear silencer trim 0h30
Renew the rear silencer trim 0h30
Remove/refit the rear left silencer trim 0h30
Renew the rear left silencer trim 0h30
Remove/refit the main silencer 1h30
Renew the main silencer 1h30
Renew the centre silencer 1h30
Remove/refit the centre silencer 1h30
Repair the main silencer* 1h30
Repair the rear silencer* 1h30
Remove/refit the front silencer Manual transmission 1h30
Remove/refit the front silencer Automatic transmission 1h30
Renew the front silencer Manual transmission 1h30
Renew the front silencer Automatic transmission 1h30
Remove/refit the rear right silencer trim 0h30
Renew the rear right silencer trim 0h30
Remove/refit both rear silencer trims 0h45
Renew both rear silencer trims 0h45

What is a BMW 2-Series rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the BMW 2-Series rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the BMW 2-Series rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

2 models covered

Model Year Range Engines covered Fuel
2-Series 2014-2021 2014-2021 218d Diesel (B47D20A), 218d Diesel (N47D20C), 218i Petrol (B38B15A), 218i Petrol (B48B20A), 220d Diesel (N47D20C), 220d M Performance Diesel (N47D20C), 220d, -xDrive Diesel (B47D20A), 220d, -xDrive Diesel (B47D20A), 220d, -xDrive M Performance Diesel (B47D20A), 220i Petrol (B48B… Diesel, Petrol
2-Series 2022-2025 2022-2025 218i Petrol (B48B20A), 220d, -mhev 48V (MHEV),Diesel (B47D20B), 220i Petrol (B48B20A), 230i Petrol (B48B20B), M240i, -xDrive Petrol (B58B30B) 48V (MHEV), Diesel, Petrol