Promo banner

Change Car Accessory Belt Kit BMW 2-Series

Change Car Accessory Belt Kit

Easy 0h30–5h00 ~50–500£
Estimated time 0h30–5h00
Estimated labour cost ~50–500£
Difficulty Easy
Renew the ancillary drive belt 0h45–5h00
Renew the engine oil and filter 0h45
Renew the air-conditioning compressor drive belt 0h30–5h00

What is a BMW 2-Series accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the BMW 2-Series accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the BMW 2-Series accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

2 models covered

Model Year Range Engines covered Fuel
2-Series 2014-2021 2014-2021 218d Diesel (B47D20A), 218d Diesel (N47D20C), 218i Petrol (B38B15A), 218i Petrol (B48B20A), 220d Diesel (N47D20C), 220d M Performance Diesel (N47D20C), 220d, -xDrive Diesel (B47D20A), 220d, -xDrive Diesel (B47D20A), 220d, -xDrive M Performance Diesel (B47D20A), 220i Petrol (B48B… Diesel, Petrol
2-Series 2022-2025 2022-2025 218i Petrol (B48B20A), 220d, -mhev 48V (MHEV),Diesel (B47D20B), 220i Petrol (B48B20A), 230i Petrol (B48B20B), M240i, -xDrive Petrol (B58B30B) 48V (MHEV), Diesel, Petrol