Promo banner

Change Car Handbrake Cable Citroen Berlingo

Change Car Handbrake Cable

Very easy 0h30 ~50£
Estimated time 0h30
Estimated labour cost ~50£
Difficulty Very easy
Check the parking brake* 0h30
Adjust the parking brake 0h45–1h00
Check the brake pedal travel 0h30
Check the parking brake shoes* 0h30
Remove/refit the left parking brake cable 0h30–2h30
Renew the left parking brake cable 0h30–2h30
Remove/refit the right parking brake cable 0h30–2h30
Renew the right parking brake cable 0h30–2h30
Remove/refit both parking brake cables 0h45–2h30
Renew both parking brake cables 0h45–2h30
Remove/refit the parking brake cable 0h30–2h30
Renew the parking brake cable 0h30–2h30
Check the parking brake cable* 0h30
Repair the handbrake cable* 0h30
Lubricate the parking brake cable* 0h30
Remove/refit the parking brake lever 0h45–2h00
Renew the parking brake lever 0h45–2h00
Repair the parking brake lever 0h30
Clean the parking brake shoes* 0h30
Mechanical parking brake 0h30
Difficult parking brake cable removal* 0h30
Remove/refit the parking brake cables 0h45–2h30
Renew the parking brake cables 0h45–2h30
Mechanical parking brake* 0h30
Repair the parking brake lever* 0h30
Adjust the parking brake* 0h30

What is the function of Citroen Berlingo handbrake cables?

The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.

Does my Citroen Berlingo have handbrake cables?

Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.

When should you change the Citroen Berlingo handbrake cables?

Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.

Is it difficult to change Citroen Berlingo handbrake cables?

Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.

3 models covered

Model Year Range Engines covered Fuel
Berlingo (-First) 1996-2011 1996-2011 1.1i Petrol (TU1JP.L4 (HFX)), 1.1i Petrol (TU1M+ (HDZ)), 1.4i Petrol (TU3A (KFW)), 1.4i Petrol (TU3JP (KFW)), 1.4i, -LPG LPG,Petrol (TU3JP (KFX)), 1.6 HDi Diesel (DV6ATED4 (9HX)), 1.6 HDi Diesel (DV6BTED4 (9HW)), 1.6i Petrol (TU5JP4 (NFU)), 1.8 D Diesel (XUD7 (A9A)), 1.8i Petrol… Diesel, LPG, Petrol
Berlingo 2008-2020 2008-2020 1.2 THP Petrol (EB2DT (HNZ)), 1.6 8V BlueHDi Diesel (DV6FC (BHZ)), 1.6 8V BlueHDi Diesel (DV6FD (BHY)), 1.6 8V BlueHDi Diesel (DV6FE (BHW)), 1.6 8V HDiF Diesel (DV6C (9HL)), 1.6 8V HDiF Diesel (DV6C (9HR)), 1.6 8V HDiF Diesel (DV6DTED (9HF)), 1.6 8V HDiF Diesel (DV6DTED (9HP)), … Diesel, Petrol
Berlingo 2019-2025 2019-2025 1.2 PureTech 110 Petrol (EB2ADT (HNP)), 1.2 PureTech 130 Petrol (EB2ADTS (HNS)), 1.5 BlueHDi 100 Diesel (DV5RD (YHY)), 1.5 BlueHDi 101 Diesel (DV5RCF (YHT)), 1.5 BlueHDi 130 Diesel (DV5RC (YHP)), 1.5 BlueHDi 130 Diesel (DV5RC (YHZ)), 1.5 BlueHDi 75 Diesel (DV5RE (YHW)), 1.6 8V B… Diesel, Petrol