Promo banner
Oil change BMW 1-Series 2004 - 2011 | Haynes Manuals

Oil change BMW 1-Series 2004 - 2011 | Haynes Manuals

1 minute read

1 series

BMW 1-Series

2004 - 2011
Time
25 minutes
Difficulty
Find your vehicle
 - step 1
The sump plug is located on the base of the engine. It is accessed underneath the car
 - step 2
You will need to open the sump access cover
 - step 3
Open the sump access cover
 - step 4
Here is the sump plug
 - step 5
Do not forget to have a suitably sized receiving tray in place
 - step 6
With an oil catchment tray in position, use a 17mm spanner or socket to carefully remove the sump plug. Fully drain the oil. When the sump has emptied, wipe clean the sump plug area with a paper towel
 - step 7
Replace (new) sump plug and washer. Do not over tighten. Replace sump access cover

Looking For DIY Advice Specific to Your Vehicle?

Search for a Manual Now

Simply enter your details to find the right match. With the correct manual to hand, you’ll have the exact information you need for your vehicle – from maintenance to troubleshooting – all in one place.