Air filter change Dodge Caliber 2006 - 2010 | Haynes Manuals

Air filter change Dodge Caliber 2006 - 2010 | Haynes Manuals

Servicing /

October 2025

1 minute read

Time

0.2 hours

Difficulty

Find your vehicle

- step 1

Air filter in position

- step 2

Carefully lift away the top section of the air filter body

- step 3

View of the air filter cover

- step 4

Air filter location

- step 5

Firstly, remove the air duct

- step 6

Undo the circular clip on the air intake, use a screwdriver to do this

- step 7

Now, using both hands pop off and lift away the engine cover

- step 8

Next, unplug the MAF sensor

- step 9

Undo the two retaining clips on the air filter body

- step 10

Now you can lift out the air filter

- step 11

Clean off any debris on the surface of the filter. Replace with a new filter if heavily contaminated

- step 12

Check air filter box for debris. Clean if required. Now replace the air filter

- step 13

Reassemble the air filter housing

Looking For DIY Advice Specific to Your Vehicle?

Search for a Manual Now

Simply enter your details to find the right match. With the correct manual to hand, you’ll have the exact information you need for your vehicle – from maintenance to troubleshooting – all in one place.