Change Car Shock Absorbers Jeep Wrangler
Change Car Shock Absorbers
| Estimated time | 0h45–1h30 |
|---|---|
| Estimated labour cost | ~75–150£ |
| Difficulty | Easy |
| Vehicles |
Wrangler 1986-1996 1
Wrangler 1997-2006 3
Wrangler 2007-2018 4
|
| Renew both front shock absorbers | 0h45–1h30 |
| Renew both rear shock absorbers | 0h45–1h30 |
What is the function of Jeep Wrangler shock absorbers?
The shock absorber controls the relative movement between the wheel and the vehicle body. This control is essential for good road holding, preventing loss of grip between the tyres and the road surface, and ensuring passenger comfort.
When should you change the Jeep Wrangler shock absorbers?
Shock absorber wear is gradual. Warning symptoms include: vehicle sensitive to crosswinds, increased braking distance, difficulty maintaining trajectory in curves, vehicle bouncing excessively over bumps, uneven tyre wear. Replace between 80,000 and 150,000 km. Always replace in pairs.
Is it difficult to change Jeep Wrangler shock absorbers?
Difficulty level 2/5: technically easy but requires specific tools (spring compressors for McPherson struts, torque wrench). A wheel alignment is recommended after the work.
4 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Wrangler 1986-1996 | 1986-1996 | 4.0 Petrol (ERH) | Petrol |
| Wrangler 1997-2006 | 1997-2006 | 2.4 Petrol (ED1), 2.5, -LPG LPG,Petrol (HX (EPE)), 4.0 Petrol (ERH), 4.0, -LPG LPG,Petrol (ERH), 4.0, -LPG LPG,Petrol (MX (ERH)) | LPG, Petrol |
| Wrangler 2007-2018 | 2007-2018 | 2.8 CRD Diesel (ENS), 2.8 CRD DPF Diesel (VM10D (ENS)), 3.6 V6, -LPG LPG,Petrol (ERB), 3.8 V6 Petrol (EGT) | Diesel, LPG, Petrol |
| Wrangler 2018-2025 | 2018-2025 | 2.0 4xe Electricity,Petrol (ECX), 2.0 T-GDi Petrol (EC1), 2.2 MultiJet Diesel (EBH) | Diesel, Electricity, Petrol |