Change Car Rear Silencer Seat Toledo
Change Car Rear Silencer
| Estimated time | 0h45–1h30 |
|---|---|
| Estimated labour cost | ~75–150£ |
| Difficulty | Easy |
| Remove/refit the silencer | 0h45 |
| Renew the silencer | 0h45 |
| Repair the silencer* | 1h30 |
| Repair the front silencer* | 1h30 |
| Align the front silencer* | 0h30 |
| Remove/refit the main silencer | 1h30 |
| Renew the main silencer | 1h30 |
| Remove/refit the centre and rear silencers | 1h30 |
| Renew the centre and rear silencers | 1h30 |
| Repair the main silencer | 0h30 |
| Align the main silencer* | 0h30 |
| Difficult main silencer removal* | 0h30 |
| Remove/refit the rear silencer | 0h45–1h30 |
| Renew the rear silencer | 0h45–1h30 |
| Repair the rear silencer | 0h30 |
| Weld a sheet-metal repair panel onto the rear silencer* | 0h45 |
| Difficult rear silencer removal* | 0h30 |
| Remove/refit the rear left silencer | 0h45 |
| Renew the rear left silencer | 0h45 |
| Remove/refit the rear right silencer | 0h45 |
| Renew the rear right silencer | 0h45 |
| Remove/refit both rear silencers | 1h30 |
| Renew both rear silencers | 1h30 |
| Remove/refit the front silencer | 0h30 |
| Renew the front silencer | 0h30 |
| Repair the main silencer* | 1h30 |
| Repair the rear silencer* | 1h30 |
What is a Seat Toledo rear silencer?
The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.
When should you change the Seat Toledo rear silencer?
No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.
Is it difficult to change the Seat Toledo rear silencer?
Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.
3 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Toledo 1999-2007 | 1999-2007 | 1.4 16V Petrol (AXP), 1.4 16V Petrol (BCA), 1.6 16V Petrol (AUS), 1.6 16V Petrol (AZD), 1.6 16V Petrol (BCB), 1.8 20V Petrol (APG), 1.8 20V Turbo Petrol (AUQ), 1.9 TDI Diesel (ARL), 1.9 TDI Diesel (ASV), 1.9 TDI Diesel (ASZ), 2.3 VR5 Petrol (AQN) | Diesel, Petrol |
| Toledo 2005-2010 | 2005-2010 | 1.4 16V Petrol (BXW), 1.6 MPi Petrol (BGU), 1.6 MPi Petrol (BSE), 1.6 Petrol (CCSA), 1.8 TFSI Petrol (BZB), 1.8 TSI Petrol (CDAA), 1.9 TDI (DPF) Diesel (BLS), 1.9 TDI Diesel (BJB), 1.9 TDI Diesel (BKC), 1.9 TDI Diesel (BXE), 2.0 8V TDI DPF Diesel (BMM), 2.0 CR TDI Diesel (CEGA),… | Diesel, Petrol |
| Toledo 2013-2019 | 2013-2019 | 1.0 TSI Petrol (CHZB), 1.0 TSI Petrol (CHZC), 1.0 TSI Petrol (DKLD), 1.0 TSI Petrol (DKRC), 1.2 Petrol (CGPC), 1.2 TSI Petrol (CBZA), 1.2 TSI Petrol (CBZB), 1.2 TSI Petrol (CJZC), 1.2 TSI Petrol (CJZD), 1.4 TDI Diesel (CUSB), 1.4 TSI Petrol (CAXA), 1.4 TSI Petrol (CZCA), 1.6 CR … | Diesel, Petrol |
Products related to these vehicles
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
