Promo banner

Change Car Rear Silencer Jeep Cherokee

Change Car Rear Silencer

Easy 0h30–1h30 ~50–150£
Estimated time 0h30–1h30
Estimated labour cost ~50–150£
Difficulty Easy
Repair the silencer* 1h30
Repair the front silencer* 1h30
Align the front silencer* 0h30
Remove/refit the main silencer 0h45
Renew the main silencer 0h45
Remove/refit both centre silencers 0h45
Renew both centre silencers 0h45
Repair the main silencer 0h30
Align the main silencer 0h30
Difficult main silencer removal* 0h30
Remove/refit the rear silencer 0h30–1h30
Renew the rear silencer 0h30–1h30
Repair the rear silencer 0h30–0h45
Weld a sheet-metal repair panel onto the rear silencer* 0h30–0h45
Difficult rear silencer removal 0h30
Remove/refit the rear silencer trim 0h30
Renew the rear silencer trim 0h30
Remove/refit both rear silencer trims 0h30–0h45
Renew both rear silencer trims 0h30–0h45
Renew the silencer 0h30–0h45
Repair the main silencer* 0h30–1h30
Remove/refit the rear left silencer 1h30
Repair the rear silencer* 0h30–1h30
Align the main silencer* 0h30
Remove/refit the silencer 0h30
Difficult rear silencer removal* 0h30
Remove/refit the rear left silencer trim 0h30
Renew the rear left silencer trim 0h30
Remove/refit the rear right silencer trim 0h30
Renew the rear right silencer trim 0h30

What is a Jeep Cherokee rear silencer?

The rear silencer (also called the back box or rear muffler) reduces exhaust noise to an acceptable level. It is located at the end of the exhaust line, after the catalytic converter, particulate filter (if fitted), and sometimes an intermediate silencer.

When should you change the Jeep Cherokee rear silencer?

No periodic replacement interval is specified. Carry out regular visual inspections for corrosion, holes, and deteriorated mounting rubbers. Signs that replacement is needed: louder exhaust noise, rattling from loose baffles, visible rust holes, exhaust fumes entering the cabin, or failure at the MOT/roadworthiness test.

Is it difficult to change the Jeep Cherokee rear silencer?

Difficulty level 2/5: technically easy but may require effort if bolts and clamps are rusted. Key steps: raise the vehicle, apply penetrating oil to clamp bolts, remove the clamp connecting the silencer to the intermediate pipe, remove the mounting rubber hangers, fit the new silencer with new gasket/clamp, reattach mounting rubbers, check for leaks with engine running.

4 models covered

Model Year Range Engines covered Fuel
Cherokee 1984-2001 1984-2001 2.5 MPI, -LPG LPG,Petrol (HX (EPE)), 2.5 TD Diesel (M52 (ENC)), 4.0 MPI, -LPG LPG,Petrol (MX (ERH)) Diesel, LPG, Petrol
Cherokee 2001-2007 2001-2007 2.4 Petrol (ED1), 2.5 CRD Diesel (ENJ), 2.8 CRD Diesel (ENR), 2.8 CRD Diesel (ENR), 3.7 V6, -LPG LPG,Petrol (EKG) Diesel, LPG, Petrol
Cherokee 2007-2013 2007-2013 2.8 CRD Diesel (ENS (VM98C)), 2.8 Diesel (ENS), 3.7 V6, -LPG LPG,Petrol (EKG) Diesel, LPG, Petrol
Cherokee 2014-2023 2014-2023 2.0 CRD Diesel (940A4000), 2.0 CRD Diesel (940A5000), 2.0 T-GDi Petrol (EC1), 2.2 CRD Diesel (55280575), 2.2 CRD Diesel (EBV (LAU61)), 2.2 CRD Diesel (EBV (LAU61)), 2.4 Petrol (ED6), 2.4 Petrol (EDD), 3.2 V6 Petrol (EHB), 3.2 V6 Petrol (EHK) Diesel, Petrol