Change Car Handbrake Cable Land Rover Discovery
Change Car Handbrake Cable
| Estimated time | 0h30 |
|---|---|
| Estimated labour cost | ~50£ |
| Difficulty | Very easy |
| Check the parking brake* | 0h30 |
| Adjust the parking brake | 0h30–0h30 |
| Check the brake pedal travel | 0h30 |
| Check the parking brake shoes* | 0h30 |
| Remove/refit both parking brake cables | 1h30–2h00 |
| Renew both parking brake cables | 1h30–2h00 |
| Remove/refit the parking brake cable | 1h30–4h00 |
| Renew the parking brake cable | 1h30–4h00 |
| Check the parking brake cable* | 0h30 |
| Repair the handbrake cable* | 0h30 |
| Lubricate the parking brake cable* | 0h30 |
| Remove/refit the parking brake lever | 0h30–2h00 |
| Renew the parking brake lever | 0h30–2h00 |
| Repair the parking brake lever* | 0h30 |
| Clean the parking brake shoes* | 0h30 |
| Mechanical parking brake* | 0h30 |
| Difficult parking brake cable removal* | 0h30 |
| Repair the parking brake lever | 0h30 |
| Remove/refit the parking brake pedal Automatic transmission | 2h30 |
| Remove/refit the parking brake pedal Manual transmission | 3h00 |
| Renew the parking brake pedal Manual transmission | 3h00 |
| Renew the parking brake pedal Automatic transmission | 2h30 |
| Remove/refit the parking brake shoes | 1h30–2h30 |
| Renew the parking brake shoes | 1h30–2h30 |
What is the function of Land Rover Discovery handbrake cables?
The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.
Does my Land Rover Discovery have handbrake cables?
Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.
When should you change the Land Rover Discovery handbrake cables?
Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.
Is it difficult to change Land Rover Discovery handbrake cables?
Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.
5 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| Discovery I 1989-1999 | 1989-1999 | 2.5 TDI 200 Diesel (21L/12L/17L), 2.5 TDI 300 Diesel (19L), 2.5 TDI 300 Diesel (19L), 3.5 V8 Petrol (22D/36L/38L), 3.5 V8i Petrol (24D), 3.9 V8i Petrol (36D) | Diesel, Petrol |
| Discovery II 1999-2005 | 1999-2005 | 2.5 TD5 Diesel (10P), 2.5 TD5 Diesel (15P/16P), 4.0 V8 Petrol (10D/12D/94D), 4.0 V8 Petrol (56D) | Diesel, Petrol |
| Discovery III 2005-2009 | 2005-2009 | 2.7 TDV6 Diesel (276DT), 4.0 V6 Petrol (406PN), 4.4 V8 Petrol (448PN) | Diesel, Petrol |
| Discovery IV 2009-2018 | 2009-2018 | 2.7 TDV6 Diesel (276DT), 3.0 TDV6 Diesel (306DT), 3.0 TDV6 Diesel (306DT), 3.0 TDV6 Diesel (306DT), 3.0 V6 S/C Petrol (306PS), 5.0 V8 Petrol (508PN) | Diesel, Petrol |
| Discovery V 2017-2025 | 2017-2025 | 2.0 Si4 Petrol (PT204), 2.0 TD4 Diesel (204DTA), 2.0 TD4 Diesel (204DTD), 3.0 TDV6 Diesel (306DT), 3.0 V6 SC Petrol (306PS), D250 (3.0 MHEV) 48V (MHEV),Diesel (DT306) | 48V (MHEV), Diesel, Petrol |