Change Car Handbrake Cable BMW X6
Change Car Handbrake Cable
| Estimated time | 0h30 |
|---|---|
| Estimated labour cost | ~50£ |
| Difficulty | Very easy |
| Check the parking brake* | 0h30 |
| Adjust the parking brake | 0h30 |
| Check the brake pedal travel | 0h30 |
| Check the parking brake shoes* | 0h30 |
| Remove/refit the left parking brake cable | 1h30 |
| Renew the left parking brake cable | 1h30 |
| Remove/refit the right parking brake cable | 1h30 |
| Renew the right parking brake cable | 1h30 |
| Remove/refit both parking brake cables | 2h00 |
| Renew both parking brake cables | 2h00 |
| Check the parking brake cable* | 0h30 |
| Repair the handbrake cable* | 0h30 |
| Lubricate the parking brake cable* | 0h30 |
| Repair the parking brake lever | 0h30 |
| Remove/refit the parking brake shoes | 2h00 |
| Renew the parking brake shoes | 2h00 |
| Clean the parking brake shoes* | 0h30 |
| Mechanical parking brake | 0h30 |
| Difficult parking brake cable removal* | 0h30 |
| Mechanical parking brake* | 0h30–3h00 |
| Repair the parking brake lever* | 0h30 |
What is the function of BMW X6 handbrake cables?
The handbrake cables transmit the force exerted on the lever (or pedal) to the rear brakes. The handbrake (parking brake) immobilises the vehicle when parked, even on steep slopes. It also serves as an emergency brake in the event of main braking circuit failure.
Does my BMW X6 have handbrake cables?
Some vehicles have a handbrake with a lever and cables (entry-level models and those over 5 years old). Other vehicles have an electric parking brake operated via a button. Vehicles with electric parking brakes do not have conventional handbrake cables.
When should you change the BMW X6 handbrake cables?
Replace if: the handbrake lever travel is excessive despite adjustment, the cable is frayed or corroded, the cable outer sheath is split, or the cable has seized (common in vehicles not driven regularly). Also replace if the vehicle rolls on a slope with the handbrake fully applied.
Is it difficult to change BMW X6 handbrake cables?
Difficulty level 1/5: very easy. Key steps: release the handbrake, raise and support the vehicle, disconnect the cable from the brake mechanism at the wheel end, disconnect from the handbrake lever, feed the new cable through the same route, reconnect at both ends, adjust tension so the lever locks at 4–7 clicks, test on a slope.
3 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| X6 2008-2014 | 2008-2014 | 30dX Diesel (M57D30N2), 30dX Diesel (N57D30A), 35iX Petrol (N54B30A), 35iX Petrol (N55B30A), 40dX Diesel (N57D30B), 50iX Petrol (N63B44A), 50iX Petrol (N63B44A), M Petrol (S63B44A), M50dX Diesel (N57D30C) | Diesel, Petrol |
| X6 2014-2019 | 2014-2019 | M Petrol (S63B44B), xDrive 30d Diesel (N57D30A), xDrive 30d Diesel (N57D30A), xDrive 30d Diesel (N57D30A), xDrive 30d M Performance Diesel (N57D30A), xDrive 35i M Performance Petrol (N55B30A), xDrive 35i Petrol (N55B30A), xDrive 40d Diesel (N57D30B), xDrive 50i Petrol (N63B44B),… | Diesel, Petrol |
| X6 2019-2025 | 2019-2025 | M50d Diesel (B57D30C), M50i Petrol (N63B44D), xDrive 30d Diesel (B57D30A), xDrive 40d mHev 48V (MHEV),Diesel (B57D30B+JA1), xDrive 40i Petrol (B58B30C) | 48V (MHEV), Diesel, Petrol |
Products related to these vehicles
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
-
- Online
-
- Make Loading
- Model Loading
- Year Loading
- Sub-Model Loading
- Engine Loading
Loading compatibility information for your vehicle
