Promo banner

Change Car Accessory Belt Kit Peugeot 508

Change Car Accessory Belt Kit

Easy 0h30–2h30 ~50–250£
Estimated time 0h30–2h30
Estimated labour cost ~50–250£
Difficulty Easy
Vehicles
508 2010-2018 23
  • 1.6 8V BlueHDi Diesel (DV6FC (BHX))
  • 1.6 8V BlueHDi Diesel (DV6FC (BHZ))
  • 1.6 8V HDi Diesel (DV6C (9HL))
  • 1.6 8V HDi Diesel (DV6C (9HR))
  • 1.6 8V HDiF Diesel (DV6C (9HD))
  • 1.6 THP Petrol (EP6CDT (5FN))
  • 1.6 THP Petrol (EP6CDT (5FV))
  • 1.6 THP Petrol (EP6FDT (5GZ))
  • 1.6 THP Petrol (EP6FDTM (5GY))
  • 1.6 VTi Petrol (EP6C (5FH))
  • 1.6 VTi Petrol (EP6C (5FS))
  • 2.0 BlueHDi Diesel (DW10FC (AHW))
  • 2.0 BlueHDi Diesel (DW10FD (AHR))
  • 2.0 BlueHDi Diesel (DW10FD (AHV))
  • 2.0 BlueHDi Diesel (DW10FD (AHX))
  • 2.0 e-HDi Diesel (DW10FC (AHS))
  • 2.0 HDiF Diesel (DW10BTED4 (RHF))
  • 2.0 HDiF Diesel (DW10BTED4 (RHR))
  • 2.0 HDiF Diesel (DW10CTED4 (RHA))
  • 2.0 HDiF Diesel (DW10CTED4 (RHD))
  • 2.0 HDiF Diesel (DW10CTED4 (RHH))
  • 2.0 RXH Hybrid4 Diesel,Electricity (DW10CTED4 (RHC))
  • 2.2 HDiF Diesel (DW12C (4HL))
508 2018-2025 7
  • 1.2 PureTech 130 Petrol (EB2ADTS (HNS))
  • 1.5 BlueHDi 130 Diesel (DV5RC (YHZ))
  • 1.6 PureTech 180 Petrol (EP6FADTXD (5GF))
  • 1.6 PureTech 225 Petrol (EP6FADTX (5GG))
  • 2.0 BlueHDi 160 Diesel (DW10FCC (EHY))
  • 2.0 BlueHDi 180 Diesel (DW10FC (EHZ))
  • Hybrid 225 (1.6 PureTech 180) Electricity,Petrol (EP6FADTXHPD (DGZ))
Renew the ancillary drive belt Manual transmission, 5-speed 0h30
Renew the ancillary drive belt (Manual transmission, Semi-automatic transmission), 6-speed 2h00
Renew the engine oil and filter 0h45
Renew the ancillary drive belt 0h30–2h30

What is a Peugeot 508 accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Peugeot 508 accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Peugeot 508 accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

2 models covered

Model Year Range Engines covered Fuel
508 2010-2018 2010-2018 1.6 8V BlueHDi Diesel (DV6FC (BHX)), 1.6 8V BlueHDi Diesel (DV6FC (BHZ)), 1.6 8V HDi Diesel (DV6C (9HL)), 1.6 8V HDi Diesel (DV6C (9HR)), 1.6 8V HDiF Diesel (DV6C (9HD)), 1.6 THP Petrol (EP6CDT (5FN)), 1.6 THP Petrol (EP6CDT (5FV)), 1.6 THP Petrol (EP6FDT (5GZ)), 1.6 THP Petrol … Diesel, Electricity, Petrol
508 2018-2025 2018-2025 1.2 PureTech 130 Petrol (EB2ADTS (HNS)), 1.5 BlueHDi 130 Diesel (DV5RC (YHZ)), 1.6 PureTech 180 Petrol (EP6FADTXD (5GF)), 1.6 PureTech 180 Petrol (EP6FADTXD (5GF)), 1.6 PureTech 225 Petrol (EP6FADTX (5GG)), 2.0 BlueHDi 160 Diesel (DW10FCC (EHY)), 2.0 BlueHDi 180 Diesel (DW10FC (… Diesel, Electricity, Petrol