Change Car Accessory Belt Kit Peugeot 2008
Change Car Accessory Belt Kit
Easy
0h30–2h00
~50–200£
| Estimated time | 0h30–2h00 |
|---|---|
| Estimated labour cost | ~50–200£ |
| Difficulty | Easy |
| Renew the ancillary drive belt | 0h30–2h00 |
| Renew the engine oil and filter | 0h30–0h45 |
What is a Peugeot 2008 accessory belt?
The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.
When should you change the Peugeot 2008 accessory belt?
Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.
Is it difficult to change the Peugeot 2008 accessory belt?
Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.
2 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| 2008 2013-2019 | 2013-2019 | 1.2 PureTech Petrol (EB2ADT (HNP)), 1.2 PureTech Petrol (EB2ADTS (HNS)), 1.2 PureTech Petrol (EB2FA (HMR)), 1.2 THP Petrol (EB2DT (HNZ)), 1.2 THP Petrol (EB2DTM (HNV)), 1.2 THP Petrol (EB2DTS (HNY)), 1.2 VTi Petrol (EB2 (HMZ)), 1.2 VTi Petrol (EB2F (HMZ)), 1.4 8V HDi Diesel (DV4… | Diesel, Petrol |
| 2008 2019-2025 | 2019-2025 | 1.2 PureTech 100 Petrol (EB2ADTD (HNK)), 1.2 PureTech 130 Petrol (EB2ADTS (HNS)), 1.2 PureTech 155 Petrol (EB2ADTX (HNN)), 1.5 BlueHDi 100 Diesel (DV5RD (YHY)), 1.5 BlueHDi 110 Diesel (DV5RCE (YHS)), 1.5 BlueHDi 120 Diesel (DV5RUC (YHV)), 1.5 BlueHDi 130 Diesel (DV5RC (YHZ)) | Diesel, Petrol |
