Promo banner

Change Car Accessory Belt Kit Nissan NV400

Change Car Accessory Belt Kit

Easy 1h30 ~150£
Estimated time 1h30
Estimated labour cost ~150£
Difficulty Easy
Vehicles
NV400 2011-2021 10
  • 2.3 CDTi 100 (FWD) Diesel (M9T-676 (F6))
  • 2.3 CDTi 110 (FWD) DPF Diesel (M9T-870 (B8))
  • 2.3 CDTi 125 (FWD) Diesel (M9T-676 (F6))
  • 2.3 CDTi 125 (FWD) DPF Diesel (M9T-670 (A6))
  • 2.3 CDTi 125 (FWD) DPF Diesel (M9T-870 (B8))
  • 2.3 CDTi 125 (RWD) Diesel (M9T-692 (F6))
  • 2.3 CDTi 130 (FWD) Diesel (M9T-704 (C7))
  • 2.3 CDTi 135 (RWD) Diesel (M9T-700 (B7))
  • 2.3 CDTi 150 (FWD) Diesel (M9T-716 (F7))
  • 2.3 CDTi 180 (FWD) Diesel (M9T-716 (F7))
Renew the ancillary drive belt 1h30
Renew the engine oil and filter 0h30–1h30

What is a Nissan NV400 accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Nissan NV400 accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Nissan NV400 accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.