Promo banner

Change Car Accessory Belt Kit Fiat Scudo

Change Car Accessory Belt Kit

Easy 0h45–1h00 ~75–100£
Estimated time 0h45–1h00
Estimated labour cost ~75–100£
Difficulty Easy
Renew the air-conditioning compressor drive belt 0h45
Renew the ancillary drive belt 0h30–1h00
Renew the engine oil and filter 0h45–1h30
Renew the ancillary drive belt Without air conditioning 0h45
Renew the ancillary drive belt With air conditioning 0h45–1h00

What is a Fiat Scudo accessory belt?

The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.

When should you change the Fiat Scudo accessory belt?

Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.

Is it difficult to change the Fiat Scudo accessory belt?

Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.

2 models covered

Model Year Range Engines covered Fuel
Scudo 1995-2007 1995-2007 1.6 8V Petrol (220A2000), 1.9D 8V Diesel (DW8 (WJY)), 2.0 16V CF3 Petrol (EW10J4 (RFN)), 2.0 16V JTD Diesel (DW10ATED4 (RHW)), 2.0 8V JTD Diesel (DW10ATED (RHZ)), 2.0 8V JTD Diesel (DW10BTED (RHX)) Diesel, Petrol
Scudo 2007-2025 2007-2025 1.6 HDi 16V 90 Diesel (DV6UTED4 (9HU)), 1.6 MultiJet 8V 90 Diesel (DV6UC (9HM)), 2.0 HDi 16V 120 Diesel (DW10UTED4 (RHK)), 2.0 HDiF 16V 120 Diesel (DW10UTED4 (RHG)), 2.0 HDiF 16V 140 Diesel (DW10BTED4 (RHR)), 2.0 MultiJet 16V 130 Diesel (DW10CTED4 (AHZ)), 2.0 MultiJet 16V 165 Di… Diesel