Change Car Accessory Belt Kit Chrysler 300
Change Car Accessory Belt Kit
| Estimated time | 0h30–5h00 |
|---|---|
| Estimated labour cost | ~50–500£ |
| Difficulty | Easy |
| Renew the ancillary drive belt | 0h30–5h00 |
| Renew the engine oil and filter | 0h45 |
What is a Chrysler 300 accessory belt?
The accessory belt (also called the auxiliary belt or serpentine belt) allows the engine to drive peripheral components such as the alternator, air conditioning compressor, power steering pump, and sometimes the water pump.
When should you change the Chrysler 300 accessory belt?
Typical replacement is every 60,000–120,000 km or 4–6 years. Signs of wear include: squealing noise (especially at start-up or in wet weather), visible cracks or fraying. Always replace the tensioner and any idler pulleys at the same time.
Is it difficult to change the Chrysler 300 accessory belt?
Difficulty level 2/5: technically easy. Key steps: note the belt routing before removal, release the automatic tensioner, slide off the old belt, replace tensioner and idler pulleys, route the new belt, release the tensioner to apply tension.
2 models covered
| Model | Year Range | Engines covered | Fuel |
|---|---|---|---|
| 300 2004-2011 | 2004-2011 | 2.7 V6 Petrol (EER), 2.7 V6 Petrol (EES), 3.0 V6 CRD Diesel (EXL (642.982)), 3.5 V6, -LPG LPG,Petrol (EGG), 5.7 V8 HEMI Petrol (EZB), 5.7 V8 HEMI VVT MDS Petrol (EZH), 6.1 V8 SRT-8 Petrol (ESF) | Diesel, LPG, Petrol |
| 300 2011-2023 | 2011-2023 | 3.0 CRD V6 Diesel (EXF), 3.6 V6 Petrol (ERB), 6.4 V8 SRT-8 Petrol (ESG), 6.4 V8 SRT-8 Petrol (ESG) | Diesel, Petrol |