Engines included:
- 1.2i Petrol (C12NZ)
- 1.4 MPFi Petrol (C14SE)
- 1.4i Petrol (X14SZ (2H6))
- 1.7 D Diesel (X17D (2H7))
Diagnostic Instructions
Connect an OBD scanner to your Opel Combo B 1993-2001 to retrieve diagnostic fault codes.
Steps:
- Connect OBD scanner to diagnostic port
- Turn ignition to ON position (engine off)
- Follow scanner instructions to read codes
- Record any codes displayed
- Consult service manual for code meanings
Fault Codes including 992 manufacturer-specific
Powertrain
Body
Chassis
| Code | Description |
|---|---|
| C0131 | Pressure sensor circuit/open |
| C0161 | Brake pedal switch fault |
| C0196 | Yaw rate sensor: values are implausible |
| C050B | Available in product |
| C0550 | Wrong Variant Configuration Programmed in Engine Controller Vacuum sensor 2 circuit high |
| C0551 | Program Electronic Control Unit (ECU) Longitudinal acceleration sensor circuit/open |
| C0710 | Steering angle sensor initialisation fault |
| C0800 | Brake fluid |
| C100A | Available in product |
| C100B | Available in product |
| C100C | Available in product |
| C10CE | Available in product |
| C10EB | Available in product |
| C10EE | Available in product |
| C1535 | Available in product |
| C1570 | Available in product |
| C1588 | Available in product |
Network
| Code | Description |
|---|---|
| U12A0 | Available in product |
| U1307 | Available in product |
| U180B | Available in product |
| U1818 | Available in product |
| U185D | Available in product |
| U185E | Available in product |
| U1885 | Available in product |
| U18B9 | Available in product |
| U1F3B | Available in product |
| U2102 | Available in product |
| U2145 | Available in product |
| U2149 | Available in product |
| U2174 | Available in product |
| U2178 | Available in product |
| U2206 | Available in product |
| U2207 | Available in product |
| U2208 | Available in product |
| U2213 | Available in product |
| U2215 | Available in product |
| U2400 | Available in product |
Other
Showing 1000 of 14591 codes · Page 9 of 15
