Promo banner

Use this page to plan routine servicing for the Vauxhall Mokka across both the 2012-2019 and 2020-2025 generations. Select your exact year and engine to see the correct maintenance plan and intervals for your Mokka.

Select your Vauxhall model below to view the online service schedule for your specific engine.

2 models covered

Model Year Range Engines covered Fuel
Mokka 2012-2019 2012-2019 1.4 16V Petrol (B14XFT (LE2)), 1.4 16V Turbo Petrol (D14NET (LUJ)), 1.4 16V Turbo, -LPG LPG,Petrol (A14NET (LUJ)), 1.4 16V Turbo, -LPG LPG,Petrol (B14NET (LUJ)), 1.6 16V Petrol (A16XER (LDE)), 1.6 16V Petrol (B16XER (LDE)), 1.6 CDTi Diesel (B16DTH (LVL)), 1.6 CDTi Diesel (B16DTN… Diesel, LPG, Petrol
Mokka 2020-2025 2020-2025 1.2 Turbo Petrol (EB2ADTD (HNK)), 1.2 Turbo Petrol (EB2ADTDB (HNE)), 1.2 Turbo Petrol (EB2ADTS (HNS)), 1.5 D Diesel (DV5RCE (YHS)) Diesel, Petrol

Servicing by engine type

Petrol Mokka servicing (Turbo and non-turbo)

Vauxhall Mokka petrol engines range from naturally aspirated 1.4/1.6 units to turbocharged 1.2 and 1.4 engines, so service requirements can differ by engine code and model year. Oil and filter changes are a key item on all petrol Mokkas, with schedules varying widely; short-trip driving and lots of cold starts can justify servicing closer to the earlier end of the stated range. On turbo petrol engines (such as 1.2 Turbo and 1.4 Turbo families), correct oil grade and a clean air filter help protect the turbo and maintain performance. Expect routine checks around spark plugs and ignition components at the specified intervals for your exact engine.

Diesel Mokka servicing (CDTi and 1.5D)

Vauxhall Mokka diesel options include several CDTi engines and a later 1.5D, and the best service cadence depends on the exact unit fitted. Diesel maintenance typically places extra emphasis on keeping the air and fuel filtration in good order and using the correct engine oil to support emissions hardware where fitted. If your driving is mainly short runs, a more cautious approach to oil change intervals can help reduce soot-related stress and keep the engine running cleanly. Always follow the plan for your engine and year, as intervals and required operations can vary significantly between diesel versions.

LPG Mokka servicing

Some Vauxhall Mokka variants run on LPG as well as petrol, and these can have additional checks alongside the standard petrol service items. Because LPG systems add extra components, it is important to keep both the petrol engine maintenance (oil, filters and ignition items) and the LPG-side inspections up to date. Spark plugs and ignition condition are especially important on LPG applications, as weak ignition can show up sooner under LPG running. Use the schedule for your exact LPG-capable engine to confirm any LPG-specific service actions and timings.

Common service operations for Vauxhall

The operations listed below are typical for Vauxhall Mokka servicing, but the exact schedule can vary by generation, engine family and how the car is used. Check the plan for your selected Mokka engine to confirm what is due and when.

Operation Typical interval Notes
Oil and filter changeSee selector aboveVaries by engine and recommended oil grade
Air filter30,000 to 60,000 kmMore often in urban or dusty driving
Cabin filter15,000 to 30,000 km or 1 yearAffects air conditioning and air quality
Brake fluid2 years (all models)Regardless of mileage
CoolantPer manufacturer (typically 5 years or 100,000 km)Check level and condition (colour, deposits) at every service
Front brake padsDepending on use (typically 30,000 to 60,000 km)Wear depends on driving style and load carried
Timing beltSee selector aboveInterval varies widely by engine
Spark plugs (petrol)30,000 to 60,000 kmPetrol engines only

Vauxhall electronic diagnostics

If an engine management light appears, start with an OBD2 scan to read the stored fault codes and freeze-frame data, then diagnose systematically rather than swapping parts. Use our fault-code guide here: /pages/fault-codes-obd-car-vauxhall-mokka. Codes are grouped by system (powertrain, body, chassis and network), and a single symptom can create multiple DTCs, especially where sensors, wiring or low voltage are involved. Clear codes only after repairs and a re-check.