Nissan Murano Maintenance Plans

The Nissan Murano maintenance schedule varies across the 2003-2009 and 2008-2014 generations and between petrol and diesel engines. Use the selector to match your Murano’s year and engine so the service intervals and operations reflect the exact version you own.

Select your Nissan model below to view the online service schedule for your specific engine.

2 models covered

Model	Year Range	Engines covered	Fuel
Murano 2003-2009	2003-2009	3.5 24V V6 Petrol (VQ35DE)	Petrol
Murano 2008-2014	2008-2014	2.5 16V dCi Diesel (YD25DDTi), 3.5 24V V6 Petrol (VQ35DE)	Diesel, Petrol

Servicing by engine type

Petrol Murano servicing (VQ35 V6)

Petrol Nissan Murano models commonly use the VQ35 3.5 V6, where regular oil and filter changes are key for long-term timing chain and valve train health. Keep the ignition system in mind at service time: worn spark plugs and ageing coil packs can trigger misfires and poor fuel economy, so follow the schedule for plug replacement where specified for your exact year. Cooling system condition matters on V6 engines too, so inspect coolant hoses and the radiator for leaks and check the correct coolant is used. If the car is used for frequent short trips, consider sticking to the time-based service interval even if you have not covered many kilometres.

Diesel Murano servicing (dCi)

Diesel Murano versions with the 2.5 dCi (YD25DDTi) place extra emphasis on air and fuel filtration, because restriction or water contamination can quickly affect starting, performance and injector health. Watch for DPF and EGR-related symptoms (hesitation, smoke, increased fuel use), especially if the car does lots of short journeys that prevent full regeneration cycles. Oil choice and oil-change timing are particularly important on turbo diesels, so use the specified grade and do not stretch intervals beyond what is listed for your selected engine and year. If your schedule lists a timing belt interval, treat it as a must-do item and replace related components as recommended for the specific engine.

Common service operations for Nissan

The operations shown below cover the most typical Murano service items, but the exact list and cadence depends on the generation and engine selected. Check both distance and time intervals, as some items are driven by age even on low-mileage vehicles.

Operation	Typical interval	Notes
Oil and filter change	See selector above	Varies by engine and recommended oil grade
Air filter	30,000 to 60,000 km	More often in urban or dusty driving
Cabin filter	15,000 to 30,000 km or 1 year	Affects air conditioning and air quality
Brake fluid	2 years (all models)	Regardless of mileage
Coolant	Per manufacturer (typically 5 years or 100,000 km)	Check level and condition (colour, deposits) at every service
Front brake pads	Depending on use (typically 30,000 to 60,000 km)	Wear depends on driving style and load carried
Timing belt	See selector above	Interval varies widely by engine
Spark plugs (petrol)	30,000 to 60,000 km	Petrol engines only

Nissan electronic diagnostics

If an engine management light is on, start by reading the OBD2 DTCs and matching them to the system involved: fuel/air metering, ignition, emissions (including DPF and EGR on diesel), or sensor and circuit faults. Codes are a starting point, not a parts list, so confirm with basic checks such as vacuum leaks, wiring and connector condition, and live data. For code lookups and next steps, see Nissan Murano fault codes.